Measuring Your X-seam:

This measurement is very important! Please measure carefully as your Bender will be custom built according to the information you provide.

Sit straight up against a wall with  your shoes off, legs outstretched and knees on the floor. Hips and shoulders should be tight to the wall, and legs straight.

Place a board against the soles of your feet- the board should be perpendicular to the floor and not angled.

Measure from the base of the wall to the face of the board against your feet. Check the measurement at both ends of the board to determine if one leg is longer than the other. Record the shortest measurement, to the nearest quarter inch, or in millimeters.

Also measure your shoulder height so that you can be provided the correct size seat. This measurement is less critical than the X-seam measurement, but is nevertheless important for your comfort on the bike.